Varec 4000 - Manual (Page 23)

13
4000 Configuration
Figure 3-3: 1200 Hand Held Terminal
3.3 Terminal Mode Operation
The 1200 Hand Held Terminal is used to scroll through the various ATT menus. Basic scroll and selection operations
are performed using the four function keys (F1 through F4) immediately below the display.
Line 1 of the display contains the menu title. Lines 2 and 3 are item display lines. Line 4 is an error message/status line.
If the item displayed on line 2 is preceded with an "M>", the item being displayed is a menu. You can select the menu
by pressing F4 (Enter). If the item is preceded by a "C>" the item being displayed is a command that can be executed
by pressing F4 (Enter).
Where:
F1 = Up
F2 = Down
F3 = Alter
F4 = Enter
Previous Function
ON / OFF
Shift