VTech 1930c - Manual (Page 14)

12
PULSE
TONE
ON
OFF
RINGER
TONE PULSE
SWITCH
BASE RINGER
ON/OFF
SWITCH
GETTING STARTED
Setting Up Your VTech VT 1930 c
Choose an area near an electrical
outlet and a telephone wall jack.
AC Power Adapter
Plug the AC power adapter into an
electrical outlet and the DC connecter
to the back of the base unit.
CAUTION:
Use only CLASS 2 9V DC POWER
SUPPLY included with your phone.
Handset Ringer
The handset ringer is programmed ON
as the factory default setting. Refer
to PROGRAMMING THE RINGER for
more information.
Setting the Tone/Pulse Switch
The TONE/PULSE switch is located
on the bottom of the base unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary (Pulse)
service, set the switch to PULSE.
TELEPHONE
WALL JACK
AC
OUTLET
TEL. LINE 9V DC
1
INT.COM
HOLD
MEM
HS IN-U
POWER
90 DIGITAL
CORDLESS
7
*
4
PQRS
TONE
GHI
CHARGE THE
HANDSET
BATTERY PACK
FOR 16 HOURS
BEFORE USING
Charge the handset battery pack
before use. The battery pack recharges
automatically whenever the handset is
in the base unit. The batteries must
be charged for 16 hours before using
your phone for the first time.
Connect Telephone Line Cord
Plug one end of the telephone cord into
a wall jack and the other end into the
back of the Base Unit.