VTech 1930c - Manual (Page 29)

27
ADVANCED FUNCTIONS
Programming The Ringer
The Handset and Base Unit ringers are
capable of four different types of ringer
tones. The following section detail how
to select different ringer types and how
to turn off the ringer.
Changing Ringer Types
To program, the Handset must be OFF.
To select a different ringer type for the
Handset Ringer do the following:
Press and hold: MEM/PGM
The display will show the following:
The MSG. WAITING alert may reap-
pear, as long as unplayed messages
remain in your Voicemail box.
NOTE:
Message Waiting works in conjunction
with Voicemail service from many local
phone companies. This is an optional
service. You are not required to
subscribe to it.
Temporary TONE
If you have rotary (PULSE) telephone
service switch is set to PULSE), this
feature allows you to temporarily
switch to TONE dialing for such
purposes as remote access to
answering machines, bank-by-phone
services, use of calling cards and other
special services.
First, dial the call normally. Then
activate the Temporary Tone feature
by pressing TONE (the key). You
can then press the numbers or symbols
you need, and your phone will send the
proper signals.
To end the call, press OFF or place
the handset back in the base. If
using the speakerphone, press SPKP
to end the call. The phone will auto-
matically go back to rotary (PULSE)
service.
FLASH
PAUSE
2 3
6
7 9
# 0
MEM/PGM
*
5
1
4
8
HOLD
OFF PHONE
CID REDIAL
INT.COM CLR/DEL MUTE
abc
mno jkl ghi
pqrs tuv wxyz
tone oper
TEMPORARY TONE
DIAL YOUR
NUMBER
PRESS
PRESS THE NUMBERS
OR SYMBOLS
PRESS
OFF
tone *
OFF
tone *
Press : 1
The display will show the following:
Press : 1 for ringer type 1
2 for ringer type 2
3 for ringer type 3
4 for ringer type 4
0 for ringer type OFF
Press OFF TO exit.
Press : #
The display will show the following:
*