VTech 1930c - Manual (Page 23)

21
FLASH
PAUSE
2 3
6
7 9
# 0
MEM/PGM
*
5
1
4
8
HOLD
OFF PHONE
CID REDIAL
INT.COM CLR/DEL MUTE
abc
mno jkl ghi
pqrs tuv wxyz
tone oper
STORING SPEED DIAL
NUMBERS
DIAL YOUR PHONE
NUMBER
PRESS
PRESS LOCATION
(00..20)
PHONE
MEM/PGM
QUICK REFERENCE GUIDE
Set-Up Adapter
¥ Plug AC adapter into a standard
electrical outlet and Base Unit.
¥ Set TONE/PULSE switch to PULSE
or TONE. The unit is factory set to
TONE.
¥ Let the handset battery pack charge
for 16 hours before first use.
¥ Connect telephone line cord to
base unit and telephone jack.
Making Calls
¥ Press the PHONE key. When
HANDSET ONis displayed and
you hear a dial tone, dial the
number.
OR
¥ Enter the number to be dialed on
the display and then press the
PHONE key.
OR
¥ Press SPKP on the Base Unit,
then dial the number.
Answering Calls
¥ To answer a call, press any key
other than OFF , MUTE , or the
Volume Keys. The handset will
NOT auto-answer when lifted off
the base cradle.
OR
.
Press SPKP on the Base Unit.
Hanging Up
¥ Press OFF or place the handset
in the cradle to hang up a call.
To Place A Call On Hold
¥ Press HOLD on the Handset or
Base Unit to place an active call on
HOLD.
. To return to the call on the Hand-
set, press either PHONE or
HOLD .
. To return to the call on the
speakerphone, press either HOLD
or SPKP .
To Mute A Call
¥ Press MUTE to disable the
Handset or Base Unit microphone.
¥ Press MUTE again to return to
normal two way conversation.
To Page The Handset
¥ To page from the base, press
INT.CO .
¥ To cancel the PAGE either press
INT.CO again on the base or press
OFF on the handset.
STORING MEMORY (SPEED) DIAL
NUMBERS:
¥ The phone should be OFF .
¥ Enter the number you wish to store
on the display up to a maximum of
20 digits.