Getting started, Fill in the telephone number card on the base unit – VTech 1930c User Manual
Page 15
13
GETTING STARTED
Fill in the telephone number card on
the base unit.
1
INT.COM
HOLD
MEM
HS
POWER
VT 1930c
9
DIGITAL
CORDLESS
7
*
4
PQRS
TONE
GHI
FILL IN THE
TELEPHONE
NUMBER CARD
Check for a dial tone. After the battery
pack is charged, rotate the Base Unit
antenna to an upright position. Pick up
the Handset and press PHONE
"HANDSET ON" will appear on the
display, and you will hear a dial tone.
If not, see ÔIN CASE OF
DIFFICULTYÕ.
CAUTION:
1. Never install telephone wiring
during a lightning storm.
2. Never install telephone jacks in
wet locations unless the jack is
specifically designed for wet
locations.
3. Never touch uninsulated telephone
wires or terminals unless the
telephone line has been
disconnected at the network
interface.
4. Use caution when installing or
modifying telephone lines.