Welch Allyn IMAGETEAM 3800 - Manual (Page 33)

Section 3 Output
3–1 IMAGETEAM 3800 User’s Guide
Scan Rate
Adjusting the scan rate changes the current draw when scanning. The slower
the scan rate, the lower the current draw. (The standby current remains the
same.) Default = 270 s/s.
Note: The chart below applies to the -12 models only.
Scan Speed Standby Scanning
270 s/s 125 mA 275 mA
135 s/s 125 mA 180 mA
67 s/s 125 mA 150 mA
* 270 s/s
135 s/s
67 s/s
Beeper Volume
Default = High.
Off
* High
Medium
Low