Welch Allyn IMAGETEAM 3800 - Manual (Page 63)

7–7 IMAGETEAM 3800 User’s Guide
Industrial Symbology Selections
Code 39, continued
Check Character
No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, but Don’t Transmit, the unit will only
read Code 39 bar codes printed with a check character, but will not transmit
the check character with the scanned data.
When Check Character is set to Validate and Transmit, the scanner will only
read Code 39 bar codes printed with a check character, and will transmit this
character at the end of the scanned data. Default = No Check Character.
Validate, but Don't Transmit * No Check Character
Validate and Transmit