Retail symbology selections – Welch Allyn IMAGETEAM 3800 User Manual
Page 79
Advertising
7–23
IMAGETEAM 3800 User’s Guide
Retail Symbology Selections
UPC A
<Default All UPC A Settings>
UPC A
* On
Off
Check Digit
* On
Off
Number System
Off
*
On
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
The numeric system digit of a UPC symbol is normally transmitted, but the unit
can be programmed so it will not transmit it. Default = On.
Advertising