Yamaha PSR-510 - Manual (Page 42)

40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
■
Realtime Melody Track Recording
The SONG MEMORY MELODY tracks record the following operations and data:
• Key on/off
(i.e. notes played on the keyboard).
• Key velocity.
• Voice number
(Percussion Kit Number).
• Volume.
• Pan.
• DSP depth.
• Harmony on/off & harmony type. • Effect on/off & effect type.
• Sustain (footswitch) on/off.
• Pitch bend.
• Octave.
Z
Select a Voice and Set the Voice Parameters ......................................................................................
Select the voice you want to record with (the R1 and R2 voices can be
used), and set the voice effects and other parameters as required.
Record Functions
X
Select a Track and Engage the Record Ready Mode ..........................................................................
Press one of the MELODY track buttons — [1] through [5] — while
holding the RECORDING section [REC] button. Both the [REC] button
indicator and the selected MELODY track indicator will flash, indicating
that the SONG MEMORY is ready to record. If the OVERALL CONTROL
section [METRONOME] button indicator is lit the metronome will also
begin to sound at the currently selected tempo, while the MULTI DISPLAY
BEAT indicator dots flash at the current tempo. The current measure
number – in this case “001” – will be shown on the MULTI DISPLAY.
NOTES
• Previously-recorded SONG MEMORY tracks that are turned ON (their
indicators are lit) can be monitored while recording. If you don’t want
to hear any of the previous tracks while recording, simply press the
corresponding SONG MEMORY TRACK buttons so their indicators go
out.
• Only one melody track can be recorded at a time.
• If the MELODY track record ready mode is engaged, Auto Accompa-
niment is automatically turned off.
MELODY
TRACK
ACCOMP
1 2 3
REC
C
Record .....................................................................................................................................................
Recording will begin as soon as you play a note on the keyboard or
press the SONG [PLAY/STOP] button, and the BEAT indicator dots will
begin to indicate the current beat as in the Auto Accompaniment mode, and
the current measure number will appear on the MULTI DISPLAY.
Play the melody using the entire keyboard if you are recording only a
MELODY track, or on the right-hand section of the keyboard if you are
recording a MELODY track at the same time as the ACCOMP track.
NOTES
• The SONG MEMORY MELODY tracks can also be recorded using the
Step Record mode — see page 48.
V
Stop Recording .......................................................................................................................................
Stop recording by pressing the TRACK button of the melody track be-
ing recorded, or the SONG [PLAY/STOP] button. The [REC] indicator
will go out and the voice number will be shown on the MULTI DISPLAY a
few seconds after recording is stopped. Song memory will return to the
measure at which recording was started.
NOTES
• “---” will appear on the MULTI DISPLAY while the PSR-510 is
processing recorded data.
STEP
BWD
RESET PLAY / STOP
STEP
FWD
MELODY
TRACK
ACCOMP
1 2 3 4 5
* MULTI PAD data cannot be recorded to SONG MEMORY.