Clock mode, Start/stop mode – Yamaha PSR-510 User Manual

Page 61

Advertising

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

+–

1_ _

+–

1_ _

■

Clock Mode

Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the

PSR-510’s time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by its own inter-
nal clock, the speed of which is set by the PSR-510 [TEMPO] button. When MIDI clock reception is enabled,
however, all timing is controlled by an external MIDI clock signal received via the PSR-510 MIDI IN terminal
(the PSR-510 [TEMPO] setting has no effect).

NOTES

• If clock reception is enabled but no MIDI clock signal is received for

more than 400 milliseconds, external clock reception is automatically
disable and normal internal clock operation resumes.

• If you attempt to change the tempo setting when MIDI clock reception

is enabled, “EC” will appear on the MULTI DISPLAY.

Press the [RECEIVE CH/CL/COM] Button & Select “cL” ....................................................................

Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]

buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select “cL” on the MULTI DISPLAY (“cL” is the
next step above MIDI channel 16).

Select the Desired Mode ........................................................................................................................

Use the [+/–] button in the number-button row to select the desired start

mode. The start/stop modes are selected in sequence each time the [+/–]
button is pressed, and the selected mode number appears on the left digit of
the MULTI DISPLAY.

RECEIVE

CH/CL/

COM

MODE

................

0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT

Mode number

Select the Desired Mode ........................................................................................................................

Use the [+/–] button in the number-button row to select the desired clock

mode. The disable and enable modes are selected alternately each time the
[+/–] button is pressed, and the selected mode appears on the left digit of
the MULTI DISPLAY (“d” for disable; “E” for enable).

Clock mode

■

Start/Stop Mode

This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,

as follows:

Mode “0”

Start/stop reception disabled.

Mode “1”

MIDI start and stop commands start and stop the PSR-510 Auto Accompaniment feature.

Mode “2”

MIDI start and stop commands start and stop the PSR-510 SONG MEMORY feature.

Press the [RECEIVE CH/CL/COM] Button & Select “cd” ....................................................................