Yamaha PSR-510 - Manual (Page 54)

52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Record Functions
■ Clearing Tracks
The [CLEAR] button can be used to completely erase the following data:
• All data after the current measure in the specified SONG MEMORY track.
• All data from the specified CUSTOM ACCOMPANIMENT track.
• All data from the specified MULTI PAD.
Z
For a SONG MEMORY Track, Set the Start Measure ..........................................................................
Use the [MEASURE #] button to set the first measure to be cleared
(page 42). All subsequent measures up to the end of the song will be
cleared.
MEASURE #
X
Specify the Track or Pad to Be Cleared ...............................................................................................
Press the appropriate track or pad button while holding the [CLEAR]
button. The ARE YOU SURE? indicator will light and the PSR-510 will ask
“Are you sure?”
CAUTION
• Turning the power OFF in the clear-ready mode can result in a
loss of recorded data.
NOTES
• You can clear several Song Memory or Custom Accompaniment
tracks at the same time. Press the required track buttons one after
another while holding the [CLEAR] button.
CLEAR
The [REWRITE SETTING] button can be used to change the settings of all recordable parameters for any
specified track or pad. You could, for example, use this function to change the voice or effect used in a SONG
MEMORY track.
Rewritable Data
All recorded data in the following tracks and pads except note on/off,
octave, sustain, pitch bend, and chord changes:
• Song Memory Accompaniment Track
• Song Memory Melody Tracks
• Custom Accompaniment
• Multi Pad
Z
For Song Memory Settings Set the Start Measure ..............................................................................
MEASURE #
■ Changing the Recorded Settings
C
Confirm or Cancel the Clear Operation ................................................................................................
Press the [YES] button if you want to go ahead with the clear operation,
thus erasing the selected track or pad. Press [NO] to cancel the operation
and preserve the contents of the track or pad. “---” will appear on the
MULTI DISPLAY while the data is being cleared.
NOTES
• Track indicators in the custom accompaniment clear mode will light
when the tracks contain data in any section. A track indicator may
remain lit even though the custom accompaniment data for that track
has been cleared if the track contain data in other sections.
ARE YOU SURE ?
NO YES
Only if you will be rewriting Song Memory settings, use the [MEAS-
URE #] button in conjunction with the [+] and [–] buttons, the number but-
tons, or the data dial to specify the measure at which you want the settings
to be rewritten. The specified measure number will appear on the MULTI
DISPLAY.