Yamaha PSR-510 - Manual (Page 52)

50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Record Functions
The following chart shows the step size and gate time settings required
to enter a variety of notes:
Example
STEP
FWD
PLAY/STOP
MULTI DISPLAY
(Beat/Clock)
MULTI DISPLAY
(Step Size)
MULTI DISPLAY
(Gate Time)
Note
Press
[PLAY/STOP]
STEP
FWD
PLAY/STOP
Hold Hold Hold
Twice
STEP
FWD
PLAY/STOP
Once
Three
times
Twice
STEP
FWD
PLAY/STOP
It’s also possible to specify the step sizes for all notes by specifying the
shortest required step size and then using the [STEP FWD] button to enter
all other note lengths.
• In the case shown to the left, press and hold , press
[STEP FWD] and then , and then release .
NOTES
B
Repeat .....................................................................................................................................................
Repeat steps 2, 3, and 4 until the required number of notes has been en-
tered.
NOTES
• Previously-recorded tracks can not be monitored during step record-
ing.
N
Stop Recording .......................................................................................................................................
Stop recording by pressing the track or MULTI PAD button being re-
corded. The [STEP REC] indicator will go out.
NOTES
• PSR-510 allows you to “punch-in” and “punch-out” at any measure to
step re-record Song Memory data. Step recording is carried out in 1-
measure units, so if you punch out in the middle of measure rests will
be recorded for the remainder of that measure.
• “---” may appear on the MULTI DISPLAY while the PSR-510 is
processing step-recorded data.