Wegener Communications UNITY 4600 - Manual (Page 35)

U NITY 4600 U SER ’ S M ANUAL
www.wegener.com 27 800032-01 Rev.F
A list of the top-level screens and their functions are summarized in Figure 3.1, which fol-
lows.
Table 3.1: Summary of Top-Level LCD Screens and Their Functions
Screen Name Functions/Applications
Home Screen Shows basic receive settings and indications about special unit conditions
Unit Info (Shortcut) Screen
• Shows unit’s serial number, label, and model number
• Shows unit’s application software version number
• Shows other key unit information.
Alarm/Warning Screens (When
applicable) • Shows current alarms and warnings (if any)
• Shows historic alarms
• Allows user to clear historic alarm records
• Allows user to acknowledge/clear certain warnings.
Recovery Abort (When applicable) • Allows user to abort a recovery in progress or abort the result of an
automated recovery - or -
• Allows user to adopt a recovered setting as a new permanent setting
Front-Panel Email (when
applicable) Allows user to read and clear unread email sent by network control
SW Download Status (when
applicable) Allows user to monitor the progress of a software download over satellite
Quick-List Control Screens
(Multiple) A variable number of commonly-used control screens duplicated at the
top level for easy access
RF Switch Bypass (When RF
switch option is installed) Allows the user to force the receiver to accept a carrier only at a
designated feed port at all times
Installation Test Allows user to implement special test modes useful at initial unit
installation
Unit Status/History Allows user to access unit status and diagnostics. Typical items located
under this menu include:
• Current unit state
• Signal Quality
• Last commanded and last successful unit settings
• Program Analysis
• Local audio/video decompression history
• Network control status/history
• Current LAN settings
• Encryption settings
• Unit internal temperature
• Option module presence/status
• Unit information screen (including software version)
• Control to clear diagnostics