Wegener Communications UNITY 4600 - Manual (Page 62)

U NITY 4600 U SER ’ S M ANUAL
800032-01 Rev. F 54 www.wegener.com
Using Backup Settings Current permanent unit settings derived from successful Auto-Recovery. User
should review settings and restore to primary if desired.
Video Buff Overflow Video PES data buffer overflow. Video PES data is being delivered faster than
can be decompressed. There may be a problem with the STC at uplink mux or
in the IRD.
Video CMD Muted Video output muted by command from network or local user.
Video Not Found Video PES data cannot be found at PID declared by PMT. There may be an
uplink mux or encoder failure.
Video PES Data Lost Video PES data in selected program is unavailable. There may be an uplink
encoder failure.
Table 4.1: Alarm and Warning Descriptions
LCD Alarm or Warning
Message
Meaning / Possible Cause