Westinghouse SE 6000 - Manual (Page 164)

# Message Explanation
A
PPENDIX
C: S
YSTEM
T
RANSACTIONS
— N
UMERICAL
S
EQUENCE C-7
178 VIP Failure VIP keypad not responding.
179 VIP Okay VIP keypad returned from failed status.
180 VIP Tamper Fail VIP tamper fail reported.
181 VIP Tamper Okay VIP tamper switch OK.
182 VIP Shunted VIP shunted.
183 VIP Unshunted VIP unshunted.
184 VIP Tamper Shunted VIP tamper switch shunted.
185 VIP Tamper Unshunted VIP tamper switch unshunted.
200 Radionics Unit Test For Radionics systems (for future use).
201 General Trouble "
202 Zone Trouble "
203 Line Card Trouble "
204 General Restoral Report "
205 Zone Restoral "
206 Line Card Restored "
207 General Opening Report "
208 Zone Opening Report "
209 General Closing Report "
210 Zone Closed "
211 General Cancel Report "
212 Zone Cancel Report "
213 Radionics Unit Power Fail "
214 Radionics Unit Restore "
215 Listen-In Report "
216 Listen Done "
217 Communicator Power Fail "
218 Was Forced Armed "
219 Status Report "
220 Busy Seconds "
221 Error "
222 Power Up Message "
223 Radionics Alarm "
230 Project Activated Project activated.
231 Project Deactivated Active project deactivated.
232 Project Normalized Project normalized.
233 Invalid Project Access denied to a project-controlled door (no access privileges).
240 Alarm Not Acknowledged No alarm response within time specified in transaction description
record.
241 Alarm Acknowledged Alarm acknowledged.