Westinghouse SE 6000 - Manual (Page 63)

4-12 S ECTION 4: M ASTER F ILE E NTRY
Group Description. Required. Enter a 30-character maximum description of the access
group.
When screen entry is completed press F6 to store the data, at which point the Access Group
Definition screen displays automatically. This screen permits you to enter the access codes that
will apply to this access group. Each access code entered must be added (F5) and stored (F6)
individually. When you finish data entry for this screen, press F6 again to store the now fully
completed access group.
N
OTE
Host-controlled and downloaded access codes may be combined in the same access group, but
see Warning at the end of this subsection.
A
CCESS
G
ROUP
D
EFINITION
[agrpentr]
Access Code. Required (zoom available). Enter an access code, in any order, to be linked
to this access group. Each code must be added (F5) and stored (F6) individually.
Access Code Description. Automatically inserted by the system.
SFS only? (smart failsoft option). Optional. Smart failsoft access codes are used only when
communications between the host and ACU are disrupted for more than 15 seconds. Enter
Y if the downloaded access code is to be sent to the ACU as a smart failsoft access code.
Note that this is used only in conjunction with host access codes. The default is N.
1
2