Westinghouse SE 6000 - Manual (Page 68)

S ECTION 4: M ASTER F ILE E NTRY 4-17
Holiday Name. Optional. Enter a 20-character maximum holiday name.
TENANTS [tententr]
Two or more companies or groups can operate a single SE 6000 system, and they are referred
to as tenants. (If required, the system can also be configured to allow individual tenants to share
components.) Tenants may be unrelated occupants of the same or different facilities who use
a single SE 6000 to view and manipulate only that data which applies to them. One of the tenants
in a multiple tenant usage is the system owner who controls and has access to the entire system
at all times. The systems owner may also be the system administrator. The default tenant code
is 0 (zero), usually the system owner, who has access to the entire system at all times. A sample
[tententr] screen follows.
Tenant Number. Optional. Enter a 4-digit maximum tenant number. Default is tenant 0.
Tenant Name. Optional. Enter a 30-character maximum tenant name.
INSTRUCTIONS [instentr]
Specific instructions are entered into the system to direct operators as to the action to be taken
when a specific point is activated (usually in response to an activated alarm). The instructions
display automatically on the alarm response screen, or may be selectively viewed from the
realtime control maps. A sample [instentr] screen follows:
1
2
1
2