Westinghouse SE 6000 - Manual (Page 97)

4-46 Section 4: Master File Entry
# Host2. Required, if applicable. Enter alternate host #2 phone number. For RDI units only,
enter login string and password.
$ Host3. Required, if applicable. Enter alternate host #3 phone number. For RDI units only,
enter login string and password.
% No Activity Disconnect Seconds. Optional. Enter the number of no activity seconds to
elapse before host disconnects from the remote ACU. Default is 90 seconds.
& RLC/RDI should: Two related Y / N fields:
• Call when alarm occurs: Y or N
• Dial back: Y or N — Not currently implemented.
' Number of transactions to hold: Optional. Enter the number of transactions to be held
in remote memory. Default is 4000.
Minutes before: Three related fields:
• Host Retry. Number of minutes to wait before retrying call to host for example, every
two minutes.
• Minimum Call. Minimum elapsed time before dialing remote site for log messages (in
hours) for example, every six hours.
• Max Call. Maximum elapsed time before dialing remote site for log messages (in hours)
for example, every 12 hours.
Schedule Next Call on / at. Enter the time and date when next call is to be made. Note that
a future date will cause the scheduler to Not dial the devices until the future date/tune is
reached.
Statistics for last successful call (automatically displayed and updated): Date, Time,
Type, Count.
! Number of failed call attempts since last success (automatically displayed and updated).
S
ITE
E
NTRY
D
EFINITION
Site codes restrict the use of one or more doors to specific groups of cards (a particular company,
a particular department, etc.). Up to 64 site codes can be assigned to the same card group ID.
The group ID is used by ACUs which support ABA magnetic card readers to make access
decisions based on site codes. A sample screen follows: