Westinghouse SE 6000 - Manual (Page 93)

4-42 Section 4: Master File Entry
" Zone number. Required (zoom available). Enter the zone number applicable for this point.
The system enters the default value of 0 (zero) if this field does not apply.
# Tenant. Required (zoom available). Enter the tenant number applicable for this point. The
system enters the default value of 0 (zero - system owner) if this field does not apply.
$ Tim Cd (1-4), Code and Mod.
Code: Required (zoom available). Four time codes can be entered to allow input
monitoring at this point. The default is time code #1.
N
OTE
The system effectively shunts points and devices not covered by an active time code.
Recommend controlling events through reporting when using an intelligent ACU.
Mod: Optional. Log messages and system action can be modified using the custom
transaction modifier codes A, B, etc., (see Section 6, System Administration). Default
is 0 and uses standard messages.
A
UTO
O
PENS
/ A
CTIVATES
The auto open / activate feature is used to instruct the system to lock / unlock doors, or activate
/ deactivate output points, for a predefined amount of time. Examples:
• A regular business door is configured to automatically unlock at a prescribed time each
morning. The time code then re-locks the door at close of business each day.
• Via an output point, a time code automatically switches on an outside light each evening at
a prescribed time. The same time code then automatically switches off the light at a
prescribed time the following morning.
A sample screen follows:
1
2