Kaiser EM2000 User Manual
Page 28
EN
28
4
5
Energy-Saving mode
energy-saving mode
energy-saving mode
Activating the child lock
Deactivating the child lock
If no function has been chosen for 60 seconds, the
device turns into
: function
selection keys turn down, the display
shows current
time, it burns the clock setting key
, keys
,
and
, .
You can also enable / disable the
manually:
•
Touch and hold the clock setting key
for about 3
seconds.
The device is produced by the factory with the activated
energy-saving mode.
•
Touch and hold
lock key
for at
least 3 seconds.
Symbol
appears on the display and it comes a triple
sound signal. The electronic controller is now disabled.
•
Touch and hold
key
for at
least 3 seconds.
The display shows actual time and it comes a triple
sound signal. Electronic control of the
oven
is ready for use again.
1
2
3
4
2
Stop/ Child
4
5
Stop/ Child lock
4
START
STOP
STOP
Delay of the keys activation
For the prevention of casual turning-on during the
oven's cleaning and in other situations it has been
applied the delay of the keys activation. The
key
has a delay of
, other keys –
.
Thus, to activate any function or change parameters it
is necessary to keep a finger on the key up to a
confirming sound signal.
An important planning possibility in your new
microwave oven with electronic programmable Logic
control is to prevent inadvertent shift or unintentional
turning on. You can activate the child lock at any time,
even when the device is turned off.
microwave
4
640 ms
140 ms
CHILD LOCK
2
4
3
1