Kaiser EM2000 - Manual (Page 40)

EN
40
USAGE
DIGITAL CLOCK TIMER
WITH
KNOB
LOGIC CONTROL
ROTARY S
Setting the clock
After your microwave oven is first plugged in or after a
power failure, the clock will flash to indicate that the time
is not correct.
To set the actual time:
• Press the key .
digits start to flash to
• Turn the rotary knob to set the hours.
• Press again the key 1 to set the minutes.
The minute digits will start to flash.
• Turn the rotary knob to set the minutes.
• To finish, press the key again.
To reset the time:
• Press the key .
• Repeat the forenamed actions.
CLOCK 1
1
CLOCK 1
The show that you are in clock
setting mode.
2
3
3
1
2
3