ZyXEL Communications M-302 - Manual (Page 36)

M-302 User’s Guide
36 Chapter 4 ZyXEL Utility Configuration
Figure 20 Link Info
The following table describes the labels in this screen.
Table 5 Link Info
LABEL DESCRIPTION
Wireless Network Status
Profile Name This is the name of the profile you are currently using.
Network Name
(SSID)
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the M-302 is
associated.
AP MAC Address This field displays the MAC address of the AP or peer computer to which the M-302
is associated.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
network.
Transmission Rate This field displays the current transmission rate of the M-302 in megabits per
second (Mbps).
Security This field displays whether data encryption is activated (WEP (WEP or 802.1x),
TKIP (WPA/WPA-PSK), AES (WPA/WPA-PSK)) or inactive (Disable).
Channel This field displays the radio channel the M-302 is currently using.
Statistics
Transmit Rate This field displays the current data transmission rate in kilobits per second (Kbps).
Receive Rate This field displays the current data receiving rate in kilobits per second (Kbps).
Authentication This field displays the authentication method of the M-302.
Network Mode This field displays the network standard (802.11b or 802.11g) of the AP or peer
computer.
Total Transmit This field displays the total number of data frames transmitted.
Total Receive This field displays the total number of data frames received.
Link Quality This field displays the quality of the signal of the M-302.