ZyXEL Communications M-302 - Manual (Page 43)

M-302 User’s Guide
Chapter 4 ZyXEL Utility Configuration 43
4.3.2 Confirm Save Screen
Use this screen to confirm and save the security settings.
Figure 27 Confirm Save Screen
The following table describes the labels in this screen.
Server CA Select a certificate authority (CA) that you trust and accept any certificates signed
by that CA.
Otherwise, select Trust Any to accept certificates from any CA.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type field.
Select a PEAP protocol. Options are GTC and MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to other network.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Exit Click Exit to return to the Site Survey screen without saving.
Table 11 Security Settings: 802.1x
LABEL DESCRIPTION
Table 12 Confirm Save Screen
LABEL DESCRIPTION
Network Name
(SSID)
This field displays the SSID previously entered.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
Network Mode This fields displays the network standard (802.11g, 802.11b or 802.11b/g) of the
wireless device.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated (WEP, 802.1x, WPA or WPA-
PSK) or inactive (DISABLE).
Back Click Back to return to the previous screen.
Save Click Save to save the changes back to the M-302 and display the Link Info
screen.
Exit Click Exit to discard changes and return to the Site Survey screen.