ZyXEL Communications M-302 - Manual (Page 48)

M-302 User’s Guide
48 Chapter 4 ZyXEL Utility Configuration
5 If you selected Ad-Hoc network type in the first screen, skip to the next step. If you
selected Infrastructure network type, specify a wireless protocol. Select 802.11b to have
the M-302 connect to an IEEE 802.11b wireless device. Select 802.11g to have the M-302
connect to an IEEE 802.11g wireless device. Select both to have the M-302 connect to
either an IEEE 802.11g or IEEE 802.11b wireless device.
Figure 33 Profile: Wireless Protocol
6 This read-only screen shows a summary of the new profile settings. Verify that the
settings are correct. Click Save to save and go to the next screen. Click Back to return to
the previous screen. Otherwise, click Exit to go back to the Profile screen without saving.
Figure 34 Profile: Confirm New Settings
7 To use this network profile, click the Activate Now button. Otherwise, click the Activate
Later button.
Note: Once you activate a profile, the ZyXEL utility will use that profile the next time it
is started.
You can activate only one profile at a time.