Yamaha CVP-59S - Manual (Page 100)

97
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The Utility Functions
MIDI 3
The MIDI 3 function page contains the TRANSPOSE and SEND parameters which determine whether
MIDI note data will be affected by the Transpose setting (page 91), and whether the ABC, rhythm, and
harmony data will be transmitted via the MIDI OUT terminal.
■ Transpose
.................................................................................................................
The RECEIVE parameter determines whether MIDI note pitch re-
ceived by the Clavinova will be affected by the setting of the Transpose
function (see page 91), while the
SEND parameter determines whether
MIDI note pitch transmitted by the Clavinova will be affected by the
setting of the Transpose function.
Press the RECEIVE or SEND LCD button to alternately turn transpo-
sition of received or transmitted MIDI data ON and OFF.
■ Send
................................................................................................................................
These parameters determine whether MIDI data corresponding to
ABC/rhythm and harmony playback will be transmitted via the MIDI
OUT terminal. Press the
ABC & RHY or HARMONY button to alter-
nately turn transmission of the corresponding data ON (9–16ch / 6–8ch)
or OFF. When on, the ABC and rhythm data is transmitted on MIDI
channels 9 through 16, and the harmony data is transmitted on channels
6 through 8.
• The Send settings are retained in
memory even when the power is
turned off if the BACKUP page MIDI
parameter is turned ON (page 107),
otherwise both parameters are turned
OFF.
• If you intend to send the ABC/rhythm
or harmony data via MIDI, it is a good
idea to set the BASIC and LEFT/2
channels (page 94) to the different
channels than the ones used for ABC/
rhythm (9…16) and harmony (6…8)
data to avoid data conflict problems.
• If either of these parameters is on, the
ABC/rhythm and/or harmony data will
be sent even if the BASIC send chan-
nel is turned OFF.
• The actual note number received or
transmitted is not affected. The trans-
position is produced by the MIDI con-
trol change RPN coarse tune data.
• The MIDI Transpose settings are
retained in memory even when the
power is turned off if the BACKUP
page MIDI parameter is turned ON
(page 107), otherwise the RECEIVE
parameter is turned On and the SEND
parameter is turned OFF.