Yamaha CVP-59S - Manual (Page 68)

65
Disk Orchestra Collection & Song Playback
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The default settings are: PART 1 = Track 1, PART 2 = Track – – (off).
Tracks 1 through 16 can be selected for both parts 1 and 2, and part 2 can
additionally be turned off. The same track cannot be assigned to both
parts.
Part Assignment for Original Song Playback
Before an original song disk is played, specify the tracks to be turned on and off by the PART 1 and
PART 2 LCD buttons via the SONG PLAY [PART ASSIGN] display.
Use the PAGE buttons to select the SONG PLAY [PART ASSIGN]
display (SONG PLAY page 6), then use the PART 1 and PART 2 pa-
rameters to assign the desired tracks to the corresponding parts. For
either part the corresponding ▲ and ▼ buttons can be used to select a
track, or the data dial or [+]/[–] buttons can be used once the parameter is
selected.
Overall Song Playback Volume Control
The ABC/SONG VOLUME control can be used to control the over-
all volume of song playback. Whenever a song is first selected, however,
the maximum volume setting (=standard volume level setting) is recalled
regardless of the position of the ABC/SONG VOLUME control. The
song playback volume can then be adjusted as required.
• If ABC is turned on during the playback
of an original song that was recorded
without ABC, the ABC/SONG VOL-
UME control will affect the ABC sound
rather than the song playback sound.
• ABC cannot be used during playback
of a song recorded with ABC or Disk
Orchestra Collection playback. VOLUME
MASTER
VOLUME ABC/SONG
VOLUME
MAX MAX
MIN MIN
• The [PART ASSIGN] display will not
appear when Disk Orchestra Collection
or Disklavier data (see “Playing Other
Types of Music Data”, page 71) is
being played.