Yamaha CVP-59S - Manual (Page 54)

51
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Custom Style
■ Style Clear
................................................................................................................
Press the STYLE CLEAR LCD button in CUSTOM STYLE page 3 to
entirely clear the current custom style. The “ Are you sure? ” confir-
mation prompt will appear. Press YES to clear the style or NO to abort.
■ Volume & Effects
...............................................................................................
CUSTOM STYLE page 4 includes a range of parameters that let you
individually set the volume, reverb, effect, and pan for each part of each
custom style section. Use the
SECT. parameter to select the section (or
“ALL” sections), and the PART parameter to select the part (or “ALL”
parts). The third LCD button selects VOLUME, REVERB, EFFECT or
PAN, and the
VALUE (or DEPTH ) parameter sets the amount or depth.
When VOLUME is selected the SECT. parameter is fixed at “ALL” and
the VALUE range is from –50 to +50, relative to the preset volume of the
source style. The REVERB and EFFECT DEPTH ranges are from 0 to
100. The PAN VALUE settings are L10 (full left) … C (center) … R10
(full right). When EFFECT is selected the TYPE parameter appears and
you can also select the effect type via the TYPE LCD button. The avail-
able effect types are listed below.
• Normally the preset VALUE and EF-
FECT TYPE are initially selected. If
PART is set to “ALL”, the R1 part
preset values are displayed. If SECT.
is set to “ALL”, the MAIN A preset
values are displayed.
• Effect type “OTHERS” may appear if
the preset effect type is other than that
of what is in the list.
Effect Type List
• CHORUS 1
• CHORUS 2
• CHORUS 3
• CELESTE 1
• CELESTE 2
• CELESTE 3
• FLANGER 1
• FLANGER 2
• SYMPHONIC (CVP-79A only)
• PHASER (CVP-79A only)
• OFF