Yamaha CVP-59S - Manual (Page 87)

84
Track Delete
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Recording
The TRACK DELETE function accessed via the RECORD [TRACK DELETE] display (RECORD
display page 5) can be used to delete all data from any specified track.
Z
Specify the Track to be Deleted
........................................................
Use the TRACK ▲ and ▼ buttons, the data dial, or the [+]/[–] buttons
to specify the track you want to delete.
X
Execute the Delete Operation
.............................................................
Press the DELETE LCD button to begin execution of the track delete
operation. The “ Are you sure? ” confirmation prompt will appear.
Press YES to delete the specified track or NO to cancel the operation.
After processing the DELETE LCD button changes to UNDO , which can
be used to undo the delete operation before selecting a different track or
exiting from the Track Delete mode.
Press the [EXIT] button, or the [RECORD] button so that its indica-
tor goes out to exit from the Track Delete function.
Track Quantize
You can “tighten up” the timing of a recorded part by aligning all notes to specified beats via the
TRACK QUANTIZE function accessed via the RECORD [TRACK QUANTIZE] display (RECORD dis-
play page 6).
• A bar graph indicating the progress of
the track delete operation will appear
while the data is being processed.
• You can check if the results are as you
expected or not, by starting and stop-
ping playback by using the [START/
STOP] button before the UNDO opera-
tion.
Z
Specify the Track to be Quantized
.................................................
Use the TRACK ▲ and ▼ buttons, the data dial, or the [+]/[–] buttons
to specify the track you want to quantize.
• Only the data-containing tracks will
appear and can be selected.
• Only the data-containing tracks will
appear and can be selected.