Yamaha CVP-59S - Manual (Page 59)

56
Style File Load
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
A set of 8 files saved by using the Custom Style save “ALL” function
(page 45) can be loaded by pressing the ALL LOAD LCD button rather
than the LOAD SINGLE button. The rest of the ALL LOAD procedure is
essentially the same as the LOAD SINGLE procedure, as follows.
X
Select a Style File
.............................................................................................
Use the STYLE FILE ▲ and ▼ LCD buttons — or the data dial or
[+]/[-] buttons — to select the desired style file.
You can “preview” the selected style by pressing the LISTEN LCD
button (the “LISTEN” function is not available in the ALL LOAD dis-
play).
• If a tempo is set prior to loading the
style, that tempo becomes the default
for the loaded style.
• Some styles are too large for the LIS-
TEN function. In this case the “Too
much data for listen! Please [LOAD].”
alert display will appear. In this case
load the style directly as in step 3.
• ABC is automatically turned on when
the LOAD SINGLE button is pressed
and the style is played back automati-
cally with the ABC accompaniment in
C Major when the LISTEN LCD button
is pressed. You can also change the
chord or try playing on the keyboard if
you like.
C
Select a Memory Number & Load the Style
.........................
Use the MEMORY LCD button to select the memory number to
which the selected style file is to be loaded (1 through 8), then press the
LOAD LCD button to load the style file.
Repeat Step 2 and 3 to select and load more style files as you like.
Press the LISTEN LCD button again or the [START/STOP] button
to stop listening.
• If the selected memory number already
contains a style, the style name will
appear on the display. The existing
style will be overwritten when a new
style is loaded.
It is not necessary to select a memory number when ALL LOAD is
selected in step 1. Simply press OK to load or CANCEL to abort.
If there is not enough memory to load the specified file the “ Not
enough memory! Delete an unneeded STYLE ? ” alert dis-
play will appear. In this case it will be necessary to delete a style you
don’t need before loading the new style. Use the
MEMORY No. ▲ and
▼ buttons to select the number of the style you want to delete, then press
DELETE to delete the style, or CANCEL to abort.
• The ALL LOAD display is as follows:
When ALL LOAD is executed, all data
in the eight memories will be replaced
by new data.