Zoom Dialer 26 - Manual (Page 30)

30 Dialer Installation & User’s Guide
Dialer LED Definitions
The dialer’s LED can give you useful information about
the dialer and the line it’s connected to. Here is a table
that shows the LED’s blinking patterns and what they
mean.
LED Pattern Meaning
ON
☼
When the LED is ON solidly, it indicates that
the dialer’s short phone cord is plugged into
the wrong dialer jack. Please plug this short
phone cord into the dialer’s other jack.
OFF The dialer is OFF HOOK.
This is usually because someone is using a
phone or a modem or fax. The LED will also
be OFF if the dialer has no power.
One Blink Every Second:
☼ ☼ ☼ ☼ ☼ ☼ ☼
Repeats Continuously
This pattern of one blink per second indicates
that the dialer is in normal (manual) mode,
and the line is ON HOOK. The dialer is ready
to route calls.
Two Rapid Blinks Every
Second:
☼☼ ☼☼ ☼☼ ☼☼ ☼☼
Repeats Continuously
This pattern of two blinks per second indicates
that the dialer is in normal mode with keys
active, and the line is ON HOOK. The dialer is
ready to route calls.
Three Rapid Blinks Every
Second:
☼☼☼ ☼☼☼ ☼☼☼
Repeats Continuously
This pattern of one blink per second indicates
that the dialer is in AutoRoute Mode, and the
line is ON HOOK. The dialer is ready to route
calls.
Four Rapid Blinks Every
Second:
☼☼☼☼ ☼☼☼☼ ☼☼☼☼
Repeats Continuously
This pattern of four blinks per second
indicates that the dialer is in AutoRoute
Mode with keys active, and the line is ON
HOOK. The dialer is ready to route calls.
Other Blinking Patterns
☼ ☼☼☼ ☼☼
The dialer will blink in other patterns when first
powered up and while routing calls.
This is normal.