Zoom Dialer 26 - Manual (Page 9)

Setting Up the Dialer 9
If you want to make calls outside North America, teach the
dialer how to dial the number in Advanced LearnMode as
follows. (You can use the same key you used for calls to
North America, if you want to).
Keys are two-digit numbers. You may use any two digit
number from 00 to 99. Keys may not contain * or #.
1. Take your phone off-hook
2. Press # 0 <key>
3. Wait for dial tone
4. Make a call outside North America using your calling
card
5. Listen for two confirmation beeps
6. Let your call go through, or hang up, as you prefer.
Now when you want to make an international call using
this prepaid phone card and key, take your phone off-
hook and dial
* # <key> <phone number>
If you have any trouble, please see LearnMode Tips
below. Otherwise please go to the Settings section on page
11.
LearnMode Tips
As you use your calling card in LearnMode, the calling
card service will prompt you for various information. Make
sure you listen carefully to each prompt before dialing.
Also, while you are dialing an entry, try to dial as evenly
as possible, without leaving long pauses between digits.
About 12 seconds after you have completed dialing, the
dialer will send two short beeps to show that the dialer
has learned how to dial using your calling card. If you
make any mistakes as you dial, or if you don’t hear the
acknowledgment beeps, hang up and then start again.
It’s a good idea to check that the call goes through, so that
you can be sure you entered all the numbers correctly. It’s
also a good idea to make a call to check that the dialer
correctly routes calls using your calling card. If either call
doesn’t go through, repeat LearnMode, waiting a little