Zoom Dialer 26 - Manual (Page 5)

Installing the Dialer 5
Power
Cube
Phone
Jack
Dialer Cord
(short)
Dialer
1 2
Note: If the dialer’s LED remains on solidly (i.e., does not blink), plug the
dialer cord into the dialer’s phone jack 1. This is very important.
If you’d like, you can mount the dialer on your wall using
the self-adhesive pad provided, or you can use screws if
you prefer. To use the self-adhesive pad, peel off the tape
on both sides of the pad, stick the pad to the bracket on
the slightly smaller side with holes, and then attach the
bracket to the wall. Instead of using the pad, you can
attach the bracket with two ¾” #6 flathead wood screws,
available in any hardware store.