Zebra Technologies P640I User Manual
Page 19
Introduction
INDICATOR LIGHT SUMMARY
980541-001 Rev. A
P640i Card Printer User Guide
9
8.
The carriage reverses the card into position
for the second color pass, magenta (M), fol-
lowed by another reverse-and-print cycle for
the third color pass, cyan (C).
9.
Now fully printed, the card re-enters the flip
station, which this time acts only as an eleva-
tor (no flipping) to bring the card up to the
laminator level.
10. An ejector arm propels the card into the lami-
nator infeed rollers, which in turn drive the
card between the two white transfer rollers,
step 11.
11. Each transfer roller is “loaded” with a patch
of laminate, cut from the top and bottom cas-
settes shortly after the previous card passed
through the laminator.
12. As the card passes between the transfer rollers the laminate patches are rolled into place.
They are then permanently bonded to the card by a pair of heated rollers applying pressure
to the top and bottom surfaces.
Cutter
Upper
cassette