Main components of the laminating system, Removing the cassettes – Zebra Technologies P640I User Manual
Page 26
16
P640i Card Printer User Guide
980541-001 Rev. A
Media Handling
Laminating Station
Main components of the laminating system
The laminating system comprises two separate independent
units, one for the front of the card, one for the back.
Removing the cassettes
1.Open the latch plate by flipping it to the full vertical posi-
tion, until you feel some resistance. Turn the UPPER latch
counterclockwise, the LOWER clockwise.
Caution • If either of the latch plates is
opened, even unintentionally, the cassette
affected must be removed and the laminate
reeled in, see page 2-6.
Transfer
roller
Transfer
guide
Laminate
cutter
Upper
Heater
compartment
Lower
cassette
Transfer toggle Must be set to
RUN (horizontal) for normal oper-
ation. Rotate the toggle to open
the rollers for jam clearance.