Device settings, Status, Print jobs – Zebra Technologies P640I User Manual

Page 75: Error conditions, Images left, Enabled features, Advanced, Printer properties

Advertising
background image

980541-001 Rev. A

P640i Card Printer User Guide

65

Printer Properties

Navigate to Properties by following this sequence:

Start

> Printers (or Printers and Faxes) > Right click

Zebra P640i >

Properties

Most of the tabs on the Properties screen (General,
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with

Device Settings

, the location

for all driver-controlled adjustments and displays.

Start

> Printers (or Printers and Faxes) > Right click

Zebra P640i > Properties > Device Settings >

Status

Navigate to Properties by following this sequence:

Start

> Printers (or Printers and Faxes) > Right click

Zebra P640i >

Properties

Most of the tabs on the Properties screen (General,
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with

Device Settings

, the location

for all driver-controlled adjustments and displays.

Start

> Printers (or Printers and Faxes) > Right click

Zebra P640i > Properties > Device Settings >

Status

Print Jobs

The number of the print job that is currently being
processed. Next is meaningful only when the printer is
not being driven by a PC. If the printer is being driven
by a PC, the PC sets the job number to be the same as
the PC-assigned spooler job number before sending to
the printer.

Error Conditions: Normally, this displays “No
Error”.

Images Left: The exact number of YMCK sets
remaining on the color ribbon, as reported by the color
ribbon core.

Enabled Features:

Uv Printing is enabled in manufacture, or by field
technician.

ID/Code (the user password) is enabled by the user.

ID/Key requires installation of a physical key. This
displays “Yes” once the printer has locked itself to the
key, not just because it has the key installed.

Advanced: Click the Advanced button to display

Sensor Data

, below.

(Another way to display this screen is through this
sequence, see page TN8-5:

Start

> Printers (or Printers

and Faxes) > Right click Zebra P640i > Properties >
Device Settings >

Control > Advanced Utilities >

Show

Sensor Data)

Caution • Some of the sub menus under
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.

Device Settings

Status

Caution • Some of the sub menus under
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.

Device Settings

Status

Advertising