Zebra Technologies R2844-Z - Manual (Page 52)

^RE – Enable/Disable Electronic Article Surveillance Bit
Use this command to set the Electronic Article Surveillance (E.A.S.) bit.
This command has no effect on transponders (such as the Texas Instruments
ISO 15693) that do not support E.A.S. capabilities.
The format for the ^RE instruction is: ^REt,r
where the parameters are:
t = set the E.A.S. bit
Default value: 'n' (Disable E.A.S.)
Other value: 'y' (Enable E.A.S.)
r = retries
Default value: 0
Other values: 0 to 10, number of retries
44 980476-001A