Zebra Technologies R2844-Z - Manual (Page 55)

Line # Type this label format Resulting printout
1. ^XA
ZEBRA
5A65627261000000
2. ^WT6^FDZebra^FS
3. ^FO100,100^A0n,60^FN0^FS
4. ^FO100,200^A0n,40^FN1^FS
5. ^RT0,6,2^FS
6. ^RT1,6,2,1
7. ^XZ
Line 1 Indicates start of label format.
Line 2 Writes the data “Zebra” to block 6 for the tag (one byte will
spill into block 7, since we have 4 bytes/block.
Line 3 Print field number ‘0’ at location 100,100.^FN0 is replaced
by what we read on line #5.
Line 4 Print field number ‘1’ at location 100,200. ^FN1 is replaced
by what we read on line #6.
Line 5 Read Tag into field number 0, starting at block 6, lasting for 2
blocks in ASCII format (default).
Line 6 Read Tag into field number 1, starting at block 6, lasting for 2
blocks in hexadecimal format.
Line 7 End of label format.
980476-001A 47