Zebra Technologies R2844-Z - Manual (Page 79)

Appendix
Interfaces
Universal Serial Bus (USB) Connector
The figure below displays the cable wiring required to use the printer’s
USB interface.
For printer supported operating systems and drivers, see the software and
documentation CD or visit the Zebra printer web site at:
http://www.zebra.com
For information on the USB interface, go to the USB web site at:
http://www.usb.org
980476-001A 71
Pin Signal
1 Vbus - N/C
2 D-
3 D+
4 Ground
Shell Shield/
Drain Wire
1 2
3 4