Yamaha 03D - Manual (Page 15)

10 02R Applications
Yamaha 02R & 03D Applications Guide
1 1 1 1 The Four Slots
This section of the Word Clock Select display
indicates the type of interface cards installed in
the four slots. The following are possible:
TASCAM
adat
AES/EBU
YAMAHA
CASCADE
ANALOG
No Connection
2 2 2 2 Wordclock Source Capable Inputs
This section of the Word Clock Select display is
used to set the 02R’s external wordclock source.
The four options to the left of each SLOT box
correspond to the inputs that are available via
that particular slot. The following options are
available.
TAPE 1/2–7/8—Row 1
TAPE 9/10–15/16—Row 2
MIC 1/2–7/8—Row 3
MIC 9/10–15/16—Row 4
W.CLK IN—Row 5 (BNC wordclock input)
2TR D1—Row 5 (2TR IN 1 AES/EBU input)
2TR D2—Row 5 (2TR IN 2 COAXIAL input)
The 02R’s wordclock source is set by selecting one of these indicators with the cursor
buttons, and then pressing the ENTER button.
The status of the wordclock capable inputs is indicated by crosses, single diagonal lines, and
highlights. The key to these indicators follows.
No wordclock signal is present at this input.
A wordclock signal is present at this input but it’s unlocked.
A wordclock signal is present at this input and it’s locked.
This input is selected as the wordclock source, however, no wordclock signal is
present.
This input is selected as the wordclock source and a wordclock signal is
present. However, you should check the wordclock connections and the
relationship between wordclock master and slaves.
This input is selected as the wordclock source, a wordclock signal is present,
and the 02R is correctly locked to it.