Yamaha 03D - Manual (Page 66)

03D Applications 61
Yamaha 02R & 03D Applications Guide
03D
AUTO NAVIGATE —This function checks all possible wordclock
sources and then displays a dialog box recommending a suitable
source. Note, however, that this function is not perfect and in some
situations it may not be able to recommend a suitable source. The
dialog box shown here appears when this function is selected.
MANUAL —These options allow you to select the wordclock source.
Internal wordclock at 44.1 kHz
Internal wordclock at 48 kHz
External wordclock via the DIGITAL STEREO IN (AES/EBU or Coaxial). The
STEREO INPUT ASSIGN FLIP switch on the D.in Setup page must be set so that
the AES/EBU or Coaxial signal is assigned to the ST IN.
External wordclock via the BNC WORD CLOCK IN connection
External wordclock via the YGDAI card inputs 1 and 2
External wordclock via the YGDAI card inputs 3 and 4
External wordclock via the YGDAI card inputs 5 and 6
External wordclock via the YGDAI card inputs 7 and 8
The status of the wordclock is indicated as follows.
03D locked to this wordclock source
Usable wordclock present
Wordclock signal present but not synchronized to selected wordclock. If such a
signal is connected and the DIGITAL ST IN SYNC CAUTION or YGDAI IN SYNC
CAUTION preference is set to ON, a warning message appears.
No wordclock signal available.
FS —When the 03D is locked to a wordclock, the sampling rate appears here (48k, 44.1k, or
32k). When it is unlocked, the display shows UNLOCK. If another page is accessed in the
unlocked state, UNLOCK appears on that page too.