Yamaha 03D - Manual (Page 63)

58 03D Applications
Yamaha 02R & 03D Applications Guide
Akai DR8 & DR16
• When a track is armed for recording, the DR8 or DR16 will normally try to take its
wordclock source from that track’s input. To prevent this, in the Digi submenu set Auto
Sync to Off. Note that the Auto Sync setting is not memorized when the DR8 or DR16 is
turned off, although it can be stored as part of a project.
03D Optional Interface Cards
To interface the 03D with digital multitrack equipment, an optional interface card is
required. One single-size interface card can be installed in the 03D.
Available Cards
The following table lists the interface cards available for use with the 03D.
YGDAI Digital Inputs
a. Cable not included.
b. Kit includes two cards and one cable.
The eight YGDAI digital inputs of the interface card work as 03D inputs for input channels
17 through 24, and cannot be reconfigured.
Assigning Signals to the YGDAI Outputs
The following table shows which signal sources can be assigned to the eight YGDAI digital
outputs. Note that these signals are not sourced directly from the 03D buses. They are
sourced from the actual outputs before D/A conversion. so they are affected, for example, by
the stereo, bus, and aux send master faders, EQ, and dynamics processors.
Card Description Connectors
CD8-AT ADAT Digital I/O Optical x2
CD8-TDII Tascam TDIF-1 Digital I/O 25-pin D-sub x1
CD8-AE-S
a
AES/EBU Digital I/O 25-pin D-sub x1
CD8-Y Yamaha Digital I/O 25-pin D-sub x1
CD8-CS KIT Digital Cascade Kit
b
25-pin D-sub x1
Output Source
1 BUS 1, AUX 1, Direct Out 1, Direct Out 9, or STEREO L
2 BUS 2, AUX 2, Direct Out 2, Direct Out 10, or STEREO R
3 BUS 3, AUX 3, Direct Out 3, Direct Out 11, or STEREO L
4 BUS 4, AUX 4, Direct Out 4, Direct Out 12, or STEREO R
5 BUS 1, AUX 1, Direct Out 5, Direct Out 13, or STEREO L
6 BUS 2, AUX 2, Direct Out 6, Direct Out 14, or STEREO R
7 BUS 3, AUX 3, Direct Out 7, Direct Out 15, or STEREO L
8 BUS 4, AUX 4, Direct Out 8, Direct Out 16, or STEREO R