Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 36)

SCSI Connection Set Up
28
14 14 14 14 Connect the 4-pin power cable from the computer’s power supply to the
power cable from the CRW2200S.
Notes
• There may be more than one 4-pin power cable available. Any one may be used.
• These connectors are D-shaped, so you can only connect the power cables in the correct
orientation. Do not apply excessive force when making this connection.
15 15 15 15 Tighten the four fastening screws on the side of the unit securely using a
phillips screwdriver.
4-pin power
cable
Bottom
Top
Bottom
Top
Power cable