Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 55)

E-IDE (ATAPI) Connection Set Up
47
Configuring for the Operating System
14 14 14 14 When using Windows 95/98/98 Second Edition/Me, after the computer’s
operating system has loaded, open “Control Panel” and double-click on
the “System” icon. Select the “Device Manager” tab and double-click on
“CDROM.” If the drive has been correctly installed, it should be listed
as shown in the figure below.
* This is a screen shown in the Windows Me environment.
For Windows NT
You can verify by opening “Control Panel,” double-clicking on “SCSI Adapter” and clicking
on the “Devices” tab.
For Windows 2000 Professional
You can verify by opening “Control Panel,” double-clicking on “System,” selecting the
“Hardware” tab, and clicking on the “Device Manager” button in “System Properties.”
Notes
• For details about how to use the operating system, refer to the documentation that came
with it.
• If there is an or mark, etc., next to the icon for the CRW2200E, this means that it
has not been installed correctly.