Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 49)

E-IDE (ATAPI) Connection Set Up
41
Notes
• When replacing an IDE-type hardware solely to a IDE cable, select master for the drive,
and connect it at the end of the cable.
• When the operating system starts with the SCSI hard drive, a primary IDE connector may
have no IDE devices. In such a case, Yamaha recommends you connect the CRW2200E
as a primary master.
• When you connect the removed IDE-type hardware to the other connector of the cable,
some cables may have only one connector. In such a case, use the cable with two
connectors.