Xilinx SP601 Hardware UG518 - Manual (Page 32)

32 www.xilinx.com SP601 Hardware User Guide
UG518 (v1.1) August 19, 2009
Chapter 1: SP601 Evaluation Board
10. Status LEDs
Table 1-14 defines the status LEDs.
Table 1-14: Status LEDs
Reference
Designator
Signal Name Color Label Description
DS1
FMC_PWR_GOOD_
FLASH_RST_B
Green
PWR
GOOD
Indicates power available for
VITA 57.1 FMC expansion
connector.
DS2 PHY_LED_LINK10 Green 10
DS3 PHY_LED_LINK100 Green 100
DS4 PHY_LED_LINK100
0
Green 1000
DS5 PHY_LED_DUPLEX Green DUP
DS6 PHY_LED_RX Green RX
DS7 PHY_LED_TX Green TX
DS8 FPGA_AWAKE Green AWAKE
DS9
FPGA_DONE Green DONE
Illuminates to indicate the
status of the DONE pin when
the FPGA is successfully
configured.
DS10
FPGA_INIT Red INIT
Illuminates after power-up to
indicate that the FPGA has
successfully powered up and
completed its internal power-
on process.
DS15
VCC5 Green
Illuminates when 5V supply is
applied.
DS16 LED_GRN,
LED_RED
Green/
Red
STATUS USB to JTAG logic.
DS17
LTC_PWR_GOOD Green
Illuminates to indicate that the
board power is good.