Yamaha YSP-1 - Manual (Page 14)

CONTROLS AND FUNCTIONS
8
This section describes the function of each control on the
remote control used to control this system. To operate
other components, see “Controlling other components” on
page 52. 1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 STANDBY/ON
Sets this system in the standby mode (see page 19).
3 Numeric buttons
Use to enter numbers.
4 NIGHT
Turns on or off the night listening modes (see page 33).
5 SURROUND
Selects the surround mode for playback (see page 32).
6 Cursor buttons / / / SELECT
Use to select and adjust SET MENU items.
7 TEST
Outputs a test tone when adjusting the speaker levels
(see page 48).
8 MUTE
Mutes the sound (see page 30). Press again to restore the
audio output to the previous volume level.
9 SLEEP
Sets the sleep timer (see page 50).
0 Beam mode buttons
Change the beam mode settings (see page 34).
A CODE SET
Use to set up remote control codes (see page 51).
B SET MENU
Displays the SET MENU on your TV or monitor
(see page 24).
C RETURN
Use to select sleep timer settings (see page 50) or return to
the previous SET MENU screen (see page 24).
D VOLUME +/–
Increases or decreases this system’s volume level
(see page 30).
E Input selector buttons
Use to select a playback source and change the control
area (see page 31).
Remote control
AV
POWER
2 3 4 1
6 7 8 5
0 +10 9
CH
CODE SET
CH LEVEL MENU
RETURN TEST
TV VOL VOLUME
MUTE
TV MUTE
TV INPUT TV DVD
AUX
BEAM MODE
SELECT
STANDBY/ON
SET MENU SURROUND
VCR SLEEP
NIGHT
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E