Yamaha YSP-1 - Manual (Page 49)

43
MANUAL SETUP
A
D
V
ANCED
OPERA
T
ION
■ IMAGE LOCATION (Image location)
You can adjust the direction from which front left and
right speaker sound is heard by directing these audio
signals so that they are also output from the center
speaker.
Use this feature to redirect audio signals if the sound
coming from the left and right speakers seems unnatural,
such as when your listening position is not the center of
your listening room.
You can only adjust this parameter when 3 beam mode or
5 beam mode is selected.
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.
■ MEMORY (User memory)
Saves and loads setting contents for SET MENU.
For example, if there are curtains in the path of beams, the
effectiveness of the beams will vary depending on whether
the curtains are open or closed.
In this case, it is handy to save settings according to the
conditions of your listening room.
Choices: USER1, USER2, USER3
SAVE (Save)
Saves settings in this unit’s memory. (The listening
environments set as the factory default settings will be
erased.)
LOAD (Load)
Loads memory settings. Initially, three listening
environments are set as the factory default settings. For
details, see page 57.
. )OFF ON
LEFT ;;;;;;;;;;0%
RIGHT ;;;;;;;;;0%
[ ]/[ ]:Up/Down
[<]/[>]:Select
E)IMAGE LOCATION
p
p
Without adjustment
With the front right
speaker adjusted
SAVE SELECT
)USER1 USER2 USER3
[ ]/[ ]:to Save
[<]/[>]:Select
[SELECT]:Enter
F)MEMORY 1/2
p
p
When the curtains are
open When the curtains are
closed