Manual setup – Yamaha YSP-1 User Manual
Page 42
MANUAL SETUP
36
To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment
parameters, as well as make advanced settings for speaker positions, sound beams, digital input and the OSD.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening
environment.
y
Most of the parameters described in SOUND MENU are set automatically when you perform EASY SETUP (see page 24). Use
SOUND MENU to make additional adjustmen
ts.
SOUND MENU
BEAM MENU
Use to manually adjust listening room parameters or alter the quality and tone of the sound output by this unit.
INPUT MENU
Use to reassign digital input/outputs and select the input mode.
OPTION MENU
Use to adjust the optional system parameters.
y
BEAM MENU allows you to make surround sound effects settings normally available in the speaker settings menu.
MANUAL SETUP
Item
Features
Page
SUBWOOFER SET
Customizes the various subwoofer settings.
38
SPEAKER LEVEL
Adjusts the output level of each speaker.
38
DYNAMIC RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
39
AUDIO SET
Customizes the muting level and audio delay.
TONE CONTROL
Adjusts the output level of high-frequency or low-frequency sound.
Item
Features
Page
PARAMETER
Customizes listening room and listening position settings.
BEAM ADJ
Adjusts the various beam settings.
ROOM EQ
Adjusts the tonal quality of the listening room.
BEAM TONE
Adjusts the output level of high-frequency or low-frequency sound for each speaker.
IMAGE LOCATION
Adjusts the position of the front left and right speakers.
MEMORY
Saves and calls up setting contents.
Item
Features
Page
INPUT ASSIGNMENT
Assigns jacks according to the component to be used.
44
INPUT MODE
Selects the initial input of the source.
44
INPUT RENAME
Renames the displayed input source.
44
Item
Features
Page
DISPLAY SET
Adjusts the brightness of the display and OSD.
UNIT SET
Changes the display unit of measurement.