Yamaha YSP-1 User Manual
Page 62
56
TROUBLESHOOTING
■
Remote control
Problem
Cause
Remedy
Refer to
page
The remote control
does not work and/or
function properly.
Wrong distance or angle.
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
19
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries.
18
You cannot operate
external components
with this unit’s remote
control.
The external component you want to
operate is not selected as the input source.
Press INPUT or the input selector buttons to select
the external component you want to operate.
31
The remote control code was not correctly
set.
Set the remote control code correctly or try another
code for the same manufacturer using the “LIST OF
REMOTE CONTROL CODES” at the end of this
manual.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Use the remote control supplied with the external
component.
—
The cursor buttons do
not work during SET
MENU operation.
You pressed an input selector button.
Press TEST once.
24