Yamaha YSP-1 - Manual (Page 16)

10
INSTALLING THIS UNIT IN YOUR LISTENING ROOM
You can use the optional metal wall bracket to mount this
system on your listening room wall.
For details on how to attach the metal bracket to the wall
or how to attach this system to the metal bracket, refer to
the instructions supplied with the bracket.
You can mount your TV on the stand placed on a
commercially available rack to install this unit under your
TV.
For details on how to attach the stand or how to attach this
system to your TV, refer to the instructions supplied with
the stand.
You can install this system either above or under your TV
in a commercially available rack.
Before installing, make sure that the rack is large enough
to allow adequate ventilation space around this unit, and
that it is strong enough to support the weight of both this
unit and your TV.
To affix this unit, remove the protection pads from the
bottom of the unit, then secure the supplied fasteners (4
pieces) to the bottom four corners of this unit and the top
of the rack, etc. as shown below.
• Do not install this unit on top of a slanted surface. This unit may
fall over and cause injury.
• Make sure you wipe the surface of the rack, etc. before securing
the fasteners. Appling the tape to a dirty or wet surface will
weaken the sticking power of the tape, and this unit may fall as
a result.
Using a metal wall bracket
Using a stand
YSP-1
TV
Metal wall bracket
TV
YSP-1
Stand
Using a rack
Affixing this unit
Notes
TV
When the YSP-1 is
installed above your TV
When the YSP-1 is
installed under your TV
YSP-1
Remove the
protection
pads
Peel off
the film
Fasteners